RC-Monster Forums - View Single Post - Not impressed with RC-M pinions

E-Revonut · 10.02.2008, 11:34 PM

I haven't had any issues with Mike's pinions running against a steel spur. More often that not it is user error in setting up the mesh. I aim for the slightest bit of play, usually the plastic package the gears come in between the gears. Haven't had any issues since I started doing this, except on my nitro REVO when I had it and that was due to a broken motor mount.

	(#17)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	10.02.2008, 11:34 PM I haven't had any issues with Mike's pinions running against a steel spur. More often that not it is user error in setting up the mesh. I aim for the slightest bit of play, usually the plastic package the gears come in between the gears. Haven't had any issues since I started doing this, except on my nitro REVO when I had it and that was due to a broken motor mount. RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh