RC-Monster Forums - View Single Post

E-Revonut · 10.04.2008, 02:41 PM

5.5mm will get the job done, 4mm would probablly be fine. I would make sure you gear the motor accordingly. In the other thread, the one that was getting hot was being run on 5s A123 and geared 62/25 which assuming the truck has stock diffs is geared for almost 50MPH, I wouldn't shoot for more than 40 and check temps then

	(#8)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	10.04.2008, 02:41 PM 5.5mm will get the job done, 4mm would probablly be fine. I would make sure you gear the motor accordingly. In the other thread, the one that was getting hot was being run on 5s A123 and geared 62/25 which assuming the truck has stock diffs is geared for almost 50MPH, I wouldn't shoot for more than 40 and check temps then RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh