Since I figured I should have a final production SPV2-81 version showing up after all the initial orders are filled, I pulled off the test chassis and dropped on a the last SPv2-81 prototype and snapped a couple more picks. Then gave it a good thrashing. Enjoy the poser pics.
I omitted side body panel for this build. For comps you don't need all the extra top body panels, just a hood, roof, and side panels, but I though it would look cool.
The paint by the way, I did just by laying door screen down, misting with black then following with red then backed in white - not a bad carbon fiber fake. The body panels shown is just a 80mm width piece of scrape Lexan bent to match up with the body posts. The paint that makes it look like Carbon Fiber/Graphite was don just by hand painting "SPV2" in red paint, backing that in black with the airbrush. The rest of the body was really simple. Lay down some door screen spray with black paint, remove, spray with red paint, then pack with white.
One of the things I am really liking is all the adjustment on the chassis especially with the shocks.
Almost forgot -
This pictured chassis kit is available here
http://www.rc-monster.com/proddetail.php?prod=flm71500