RC-Monster Forums - View Single Post - Tekno support.. this is a funny thread since when they call you don't actually get Ne

George16 · 10.09.2008, 08:26 AM

Just use a 5x8x.5mm shim with a 5mm e-clip and you'll be fine. By the way, that is how all the tmaxx and revo clutches are setup from the factory.

Tekno basically just copied the stock nitro setup and adapted it for electric flatform. They didn't do anything wrong. You'll be surprised to see the replacement looking exactly the same with the ine you currently have.

	(#9)
George16 Supermaxx Offline Posts: 2,031 Join Date: Oct 2007 Location: Earth	10.09.2008, 08:26 AM Just use a 5x8x.5mm shim with a 5mm e-clip and you'll be fine. By the way, that is how all the tmaxx and revo clutches are setup from the factory. Tekno basically just copied the stock nitro setup and adapted it for electric flatform. They didn't do anything wrong. You'll be surprised to see the replacement looking exactly the same with the ine you currently have. Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer) Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2)