Quote:
Originally Posted by bdebde
I notice mine gets quite hot when trying to discharge so I don't do it with that charger.
|
Hmm.. I do have another charger, but it will only facilitate 15 cells at a time. I would have to revert to single pack discharging.
Quote:
Originally Posted by wallot
I would check the fan, it might be worn out, dusty. never had any temp issues with my old 989.
|
I'll check the fan later tonight... To be honest, the fan on the power supply was filthy
and I had to remove it and clean it before use.
Thanks for suggestion wallot.
Quote:
Originally Posted by BrianG
12 cells at 2A is ~24 watts. It's gonna get warm. My Hyperion EOS 7i does that too - gotta remember it is converting all that energy to pure heat. Also, you might be hitting a power limit. My Hyperion has a 20w limit, so the higher cell counts I go, the less current it will discharge at.
|
do you have any recommendations Brain? like a basic setup for discharging and charging... I am currently running 3 sets of 16 cell packs and a 12 cell pack (all have cycled up to an average of 3200 mah)
Thanks for the quick response guys...
Alien