RC-Monster Forums - View Single Post

rchippie · 09:32 PM

Thank's guys:D . That is a mugen MBX4, mike made the custom adapter plate to hold the ofna 51t plastic spur on the mugen diff. Yes squee that is the buggy i got for letting someone drive my DVO:L: . COOLHAND that is the stock diff holder . The radio box is a rpm box for the rc10gt, i cut it down a 1/2 inch for a better fit. With 14 cells it weighs as much as a nitro buggy.

I would persoally like to thank the following people for there help.
JACK MILES for the pics
MONSTER MIKE for the diff plate, & help
DAFNI for advice on motor & gearing
SERUM for advice on motor & gearing.

	(#6)
rchippie RC-Monster Brushless Offline Posts: 2,824 Join Date: Apr 2005 Location: largo fl	11.06.2005, 08:52 PM Thank's guys:D . That is a mugen MBX4, mike made the custom adapter plate to hold the ofna 51t plastic spur on the mugen diff. Yes squee that is the buggy i got for letting someone drive my DVO:L: . COOLHAND that is the stock diff holder . The radio box is a rpm box for the rc10gt, i cut it down a 1/2 inch for a better fit. With 14 cells it weighs as much as a nitro buggy. I would persoally like to thank the following people for there help. JACK MILES for the pics MONSTER MIKE for the diff plate, & help DAFNI for advice on motor & gearing SERUM for advice on motor & gearing. REAL MEN RUN BRUSHLESS Last edited by rchippie; 11.06.2005 at 09:32 PM.