RC-Monster Forums - View Single Post

hoovhartid · 10.23.2008, 06:51 PM

I'm using the Maximizer 17mm adapters same as Mike sells.

They are simple and light, with no slop.

As for the Badlands, I used the MT size and stretched them onto 1/2" offset LPR rims;

This makes the sidewall a bit more rigid. I did tape the insides of them before mounting to prevent ballooning tho. They are my best all-around bashing tire.

I am using the HPI Phaltlinges for street running;

I have the Crimefighters for the track (sorry no pic).

As for the badlands;
these tires;
http://www3.towerhobbies.com/cgi-bin...&I=LXNKS3&P=ML

I used these rims;
http://www3.towerhobbies.com/cgi-bin...?&I=LXTJB4&P=7

I was "supposto" use these;
http://www3.towerhobbies.com/cgi-bin...?&I=LXSBS0&P=7

	(#30)
hoovhartid Monster Bottle Opener Offline Posts: 468 Join Date: Jun 2008	10.23.2008, 06:51 PM I'm using the Maximizer 17mm adapters same as Mike sells. They are simple and light, with no slop. As for the Badlands, I used the MT size and stretched them onto 1/2" offset LPR rims; This makes the sidewall a bit more rigid. I did tape the insides of them before mounting to prevent ballooning tho. They are my best all-around bashing tire. I am using the HPI Phaltlinges for street running; I have the Crimefighters for the track (sorry no pic). As for the badlands; these tires; http://www3.towerhobbies.com/cgi-bin...&I=LXNKS3&P=ML I used these rims; http://www3.towerhobbies.com/cgi-bin...?&I=LXTJB4&P=7 I was "supposto" use these; http://www3.towerhobbies.com/cgi-bin...?&I=LXSBS0&P=7 I used a "bottom" line.