RC-Monster Forums - View Single Post

Shark413 · 10.26.2008, 11:31 PM

Here is the response I got from Steve Neu. I would recommend you contact Neumotors and ask them if you should send it in for a check-up. It will take awhile to have the motor checked out, but on the other hand you don't want the motor to come apart on you.

NeuMotors:

Hello,
It might be a good idea to send it in for a check-up. .05 is a little too much.

Steve Neusneu@neutronics.com

On Jul 17, 2008, at 2:19 PM, wrote:

Hi, I purchased a Neu 1515/1Y/F motor back in march 2008. Recently while cleaning/checking the motor I noticed some play in the front bearing. I tried to measure it with a dial indicator and I think it was about .05" worth of play.

Thanks

	(#4)
Shark413 RC-Monster Carbon Fiber Offline Posts: 468 Join Date: Nov 2006 Location: Los Angeles, CA	10.26.2008, 11:31 PM Here is the response I got from Steve Neu. I would recommend you contact Neumotors and ask them if you should send it in for a check-up. It will take awhile to have the motor checked out, but on the other hand you don't want the motor to come apart on you. NeuMotors: Hello, It might be a good idea to send it in for a check-up. .05 is a little too much. Steve Neusneu@neutronics.com On Jul 17, 2008, at 2:19 PM, wrote: Hi, I purchased a Neu 1515/1Y/F motor back in march 2008. Recently while cleaning/checking the motor I noticed some play in the front bearing. I tried to measure it with a dial indicator and I think it was about .05" worth of play. Thanks Losi 2.0 8ight-E / Losi 2.0 8ight-E/T / jammin SCTRC10 / Slash 4x4 PE