RC-Monster Forums - View Single Post - E-Revo to E-Slayer conversion Project

MetalMan · 11.03.2008, 01:27 AM

If someone can weigh a stock E-Revo transmission + lower skidplate + all mounting screws + Neu 1512 or 1515 + pinion gear, and provide the entire weight of their truck, then it would be possible to estimate. The corresponding parts on this conversion (bracing + motor + motor mount/support + screws + skidplate) weigh 1lb. 6.6 oz. or 641grams.

I think 9lb. is not a hard goal to accomplish, as long as Lipo and moderately sized tires are used.

	(#64)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	11.03.2008, 01:27 AM If someone can weigh a stock E-Revo transmission + lower skidplate + all mounting screws + Neu 1512 or 1515 + pinion gear, and provide the entire weight of their truck, then it would be possible to estimate. The corresponding parts on this conversion (bracing + motor + motor mount/support + screws + skidplate) weigh 1lb. 6.6 oz. or 641grams. I think 9lb. is not a hard goal to accomplish, as long as Lipo and moderately sized tires are used. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz