RC-Monster Forums - View Single Post - KB-45 Heat

GHSTRCN · 11.06.2008, 01:54 AM

Alright. Hopefully the 15sec I ran it for, actually, maybe around 5-7, didn't do too much harm. I like to exagurate I guess...

And just for everyone's info:

KB-45 8XL
1600kv (some say1700kv)
45x77mm
6mm shaft
It's a beast!

I have the pinions down, but thanks for the offer above. If this motor dies, the 10XL may be the next step, or a Medusa. I'm scared, but somewhat confident.

Thanks guys! Tons of replies in just a hour or so!

	(#9)
GHSTRCN RC-Monster Stock Offline Posts: 17 Join Date: Nov 2008 Location: Sammamish, WA	11.06.2008, 01:54 AM Alright. Hopefully the 15sec I ran it for, actually, maybe around 5-7, didn't do too much harm. I like to exagurate I guess... And just for everyone's info: KB-45 8XL 1600kv (some say1700kv) 45x77mm 6mm shaft It's a beast! I have the pinions down, but thanks for the offer above. If this motor dies, the 10XL may be the next step, or a Medusa. I'm scared, but somewhat confident. Thanks guys! Tons of replies in just a hour or so! Sold Monster GT 8.0 - KB-45 8XL 1600kv, MMM, Zippy-R 5S 25C 4800mah LiPo, Spektrum DX 3.0 Rustler VXL - 3S 4900mah 20C Rhino Lipo, 2S Turnigy 5000mah 20C Lipo, DX 3.0