|
11.07.2008, 08:49 PM
I have drilled my input shafts to 2.5mm and used the revo yoke setscrew (cut the threaded portion off) in orde to strengthen that area. Then you need to dremel the idler gear gap to allow fitment of the bigger pin.
Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer)
Predator with OS .21TM
Supermaxx with Mach .26
Revo with OS .18TZ
Kyosho ST-RR Conversion
Ofna CR with Tekin ESC/Motor (2)
|