RC-Monster Forums - View Single Post - my slash tranny exploded mid-flip

What's_nitro? · 11.08.2008, 11:47 PM

The stock drive pins are the same diameter as the hole in the top-shaft. You may need some Loctite/JB Weld -or- a larger pin if the hole was widened when you put the drill bit in there.

	(#16)
What's_nitro? Soldermaster Extraordinaire Offline Posts: 4,529 Join Date: Apr 2007 Location: Plymouth, MA, USA	11.08.2008, 11:47 PM The stock drive pins are the same diameter as the hole in the top-shaft. You may need some Loctite/JB Weld -or- a larger pin if the hole was widened when you put the drill bit in there.