RC-Monster Forums - View Single Post

YogyBrushless · 11.20.2008, 05:12 AM

just a quick question guys (hopefully not jacking the thread), there is a 0.3 mm difference in the shafts of cc mamba motors (2.0 mm) and the neu 1105 motors (2.3 mm). if i have pinions for the cc motor will be hard fitting them to the neu motor shaft ? (i.e stretching the pinion hole from 2.0mm to 2.3mm) ??

	(#1)
YogyBrushless RC-Monster Carbon Fiber Offline Posts: 191 Join Date: Nov 2007	11.20.2008, 05:12 AM just a quick question guys (hopefully not jacking the thread), there is a 0.3 mm difference in the shafts of cc mamba motors (2.0 mm) and the neu 1105 motors (2.3 mm). if i have pinions for the cc motor will be hard fitting them to the neu motor shaft ? (i.e stretching the pinion hole from 2.0mm to 2.3mm) ??