RC-Monster Forums - View Single Post

What's_nitro? · 11.25.2008, 12:19 AM

IDK about the tubing idea- the smallest wall thickness I can seem to find is 0.028" or about 3/4 mm. Of course, that tubing could be milled down on a lathe to the required diameter.

	(#5)
What's_nitro? Soldermaster Extraordinaire Offline Posts: 4,529 Join Date: Apr 2007 Location: Plymouth, MA, USA	11.25.2008, 12:19 AM IDK about the tubing idea- the smallest wall thickness I can seem to find is 0.028" or about 3/4 mm. Of course, that tubing could be milled down on a lathe to the required diameter.