RC-Monster Forums - View Single Post

wallot · 11.27.2008, 04:56 AM

the biggest issue with 3S in detta is their height as the battery holder can accommodate batteries only up to about 22mm tall, so its more suited for 2S

but these should fit ok
http://www.hobbycity.com/hobbycity/s...0C_Lipoly_Pack

Rhino is just another Zippy brand. the were supposted to be the lowest grade, but they seem to be holding quite nice.

they indeed use JST-XH tap

I do have rhino 2S 1050 and 1250 for testing as they were so cheap, but normally I use Zippy-H 2S 1450mah and now lately Trakpower 2S 1345mah

	(#5)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	11.27.2008, 04:56 AM the biggest issue with 3S in detta is their height as the battery holder can accommodate batteries only up to about 22mm tall, so its more suited for 2S but these should fit ok http://www.hobbycity.com/hobbycity/s...0C_Lipoly_Pack Rhino is just another Zippy brand. the were supposted to be the lowest grade, but they seem to be holding quite nice. they indeed use JST-XH tap I do have rhino 2S 1050 and 1250 for testing as they were so cheap, but normally I use Zippy-H 2S 1450mah and now lately Trakpower 2S 1345mah Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus