View Single Post
Old
  (#74)
GO-RIDE.com
RC-Monster Carbon Fiber
 
Offline
Posts: 405
Join Date: Jun 2007
12.01.2008, 05:48 PM

Quote:
Originally Posted by bustitup View Post
I ended up getting these for about $18 shipped....springs should be ok?

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWA:IT&ih=001
Those are the same ones I use on my "Monstered" e-crt.5. The yellow springs work great. I cut 2 coils off of each spring so I could get the ride height I wanted, but the overall spring rate is very good.

The stock pistons are 1.4mm holes, but I like 1.5mm hole pistons with 35 - 40wt oil if you drive at a track. If you are just bashing then the 1.4mm pistons with 20 - 25 wt oil.


E-CRT.5 Monster - RCM chassis, MM/Medusa 50x3300/3s, truck tires, 1/8 shocks
E-CRT.5 Stock - Sidewinder/4600/2s, buggy tires
E-8ight - Tekin RX8 2000kv/4S
E-8ight T- Tekin RX8 1700kv/5S
   
Reply With Quote