Below is the email reply I recieved from MGM.
Dear Tim,
I am sorry for delay.
I suppose for 10 or 12 Lipo and this motor and car you need controllers 200A, real 200A, no only "on the paper" as write, for example Novak (GTB brushless racing controller, 540A !!! ) or more. Very depend on the gear and mechanical load, however no available data for Neu motors - in this situation very problematic say you need 100A or 200A or 300A controller. We know Neu motors, however we don´t test this (2215 1y) type.
We have 10 Lipol controller only up to 125A and 15 Lipol controller up to 100A in this time.
We prepare new, real 200A and real 400A controllers up to 15 Lipol, however these new ESC will be available on the spring 2009.
Best regards,
Grisa
----- Original Message -----
To:
mgm@mgm-compro.cz
Sent: Monday, November 17, 2008 3:28 PM
Subject: controller for 1/5 scale truck
Hello
I’m interested in what controller you would recommend for my project vehicle.
It’s a 1/5 scale 2 wheel drive truck. Running weight will be around 29 lbs. I will be running a Neu 2215 1y brushless motor. I plan on running between 10s and 12 s lipo batteries depending on how fast I want to go. I’m shooting for 45 mph min to 65 mph when I want to just drive fast. I’m starting with a HPI Baja 5T truck and converting that to brushless. This truck will be used for bashing, jumping, and fun stuff like that. Thank you for any info you can provide me.
Thanks Tim