RC-Monster Forums - View Single Post

BrianG · 12.06.2008, 06:15 PM

Your servo is centered via radio trim, or through the linkage? Center it via the radio, and then tweak the linkage so everything is straight.

FYI: When setting the EPA, you should start at something like 60%, turn the wheel full one way, and increase the EPA until the steering locks, then back off a notch or two. Repeat for the other side. This provides the max steering throw without damaging the servo by having it try to fight against mechanical limits.

	(#2)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	12.06.2008, 06:15 PM Your servo is centered via radio trim, or through the linkage? Center it via the radio, and then tweak the linkage so everything is straight. FYI: When setting the EPA, you should start at something like 60%, turn the wheel full one way, and increase the EPA until the steering locks, then back off a notch or two. Repeat for the other side. This provides the max steering throw without damaging the servo by having it try to fight against mechanical limits.