RC-Monster Forums - View Single Post

xtownrc · 12.10.2008, 05:45 PM

I just got done putting together a Demo RC8 for our shop with the Tekno conversion and the Novak HV Pro 4.5 with 2 LRP 3600 NiMH. At first we had the Elektri-Clutch on there and thought that might be messing up the feedback the motor was sending the ESC, but I replaced that with a pinion gear and I still have the same problem. It will go at very lower speeds for a couple of seconds then will either take off and cut out or will just cut out. LiPo Mode is off. One of our suppliers is looking into the issue for us at Novak to see if they can get answers and faster. They also said they have other customers having similar issues.

	(#18)
xtownrc RC-Monster Stock Offline Posts: 2 Join Date: Dec 2008 Location: Xenia, OH	12.10.2008, 05:45 PM I just got done putting together a Demo RC8 for our shop with the Tekno conversion and the Novak HV Pro 4.5 with 2 LRP 3600 NiMH. At first we had the Elektri-Clutch on there and thought that might be messing up the feedback the motor was sending the ESC, but I replaced that with a pinion gear and I still have the same problem. It will go at very lower speeds for a couple of seconds then will either take off and cut out or will just cut out. LiPo Mode is off. One of our suppliers is looking into the issue for us at Novak to see if they can get answers and faster. They also said they have other customers having similar issues.