RC-Monster Forums - View Single Post

shaunjohnson · 04:53 PM

thanks again guys.
i was looking at running rhino-zippy lipo's.
4900mah
http://www.hobbycity.com/hobbycity/s...idProduct=7299
was planning to run them in parrelel to get 9800mah (i think they are 5000mah cells though but u cant use the last few mah anyway otherwie the voltage drops too low)

so that gives me 196A continuous.
i know it cant draw this much before something goes poof so i should be right with that setup?
and i also get HUGE long runtime to boot

and i was also thinking that i could pissibly run them as a single pack to keep weight down in the 5 min heats.
will this setup (MMM + medusa 2200kv 80mm, revo 3.3 w/ stock shifting tranny) run on a mere 98A continuous?
the nitro guys already took a look at my rustler in hte 1 hour mains (i was racing it in hte 1/8th MT class as that's the only way it can fit in lol)

and the looks on their faces were kinda like...

lets hope my setup comes together

thanks again guys,
shaun

	(#3)
shaunjohnson i pwn nitro Offline Posts: 769 Join Date: Nov 2008 Location: with ur GF	12.11.2008, 04:50 PM thanks again guys. i was looking at running rhino-zippy lipo's. 4900mah http://www.hobbycity.com/hobbycity/s...idProduct=7299 was planning to run them in parrelel to get 9800mah (i think they are 5000mah cells though but u cant use the last few mah anyway otherwie the voltage drops too low) so that gives me 196A continuous. i know it cant draw this much before something goes poof so i should be right with that setup? and i also get HUGE long runtime to boot and i was also thinking that i could pissibly run them as a single pack to keep weight down in the 5 min heats. will this setup (MMM + medusa 2200kv 80mm, revo 3.3 w/ stock shifting tranny) run on a mere 98A continuous? the nitro guys already took a look at my rustler in hte 1 hour mains (i was racing it in hte 1/8th MT class as that's the only way it can fit in lol) and the looks on their faces were kinda like... lets hope my setup comes together thanks again guys, shaun Last edited by shaunjohnson; 12.11.2008 at 04:53 PM.