RC-Monster Forums - View Single Post

12.12.2008, 03:32 PM

[/QUOTE]I totally agree and I’m listening..

But for my first one I'm going manual, I want to know what it takes to build $1200 beach chair.. Then I'll either work on my 3rd world chair and or do a BL one.. But I will have one soon so if you can please start to think about the drive system for it that would be killer!.

Here is what has been offered up thus far by TexasSP.

http://www.hobbycity.com/hobbycity/s...28eq:_70-55%29

I'll probably need at least two total of them if not one per wheel..

What do you think?? got any other recommendations??

Thanks for your time and your input as it is always much appreciated!..:smile
I can and will do better than that! but I guess I need to ask what is / should the top speed be?? that quickest one I've seen went 10mph, so how quick do I go paralyzed?? do I double it?? and what kind of runtime should I account for during a typical day ??

[/QUOTE]

The HobbyCity 180kv outrunner would be great if outrunners r as good as people say they r (never had personal experience with one). I would suggest one on every drive wheel. I must ask though, how dependable r these motors?, i mean it isn't like our rc's that u can simply pick up and take home to fix, if the chair breaks down u r stuck until someones finds u; not good if its cold outside. I think 15mph is good number to shoot for. My chair will do a 16 mile range @ full tilt(7.5mph), so i would like to at least that of range on a single charge going 15mph.

	(#12)
Fast5sRevo88 Guest Posts: n/a	12.12.2008, 03:32 PM [/QUOTE]I totally agree and I’m listening.. But for my first one I'm going manual, I want to know what it takes to build $1200 beach chair.. Then I'll either work on my 3rd world chair and or do a BL one.. But I will have one soon so if you can please start to think about the drive system for it that would be killer!. Here is what has been offered up thus far by TexasSP. http://www.hobbycity.com/hobbycity/s...28eq:_70-55%29 I'll probably need at least two total of them if not one per wheel.. What do you think?? got any other recommendations?? Thanks for your time and your input as it is always much appreciated!..:smile I can and will do better than that! but I guess I need to ask what is / should the top speed be?? that quickest one I've seen went 10mph, so how quick do I go paralyzed?? do I double it?? and what kind of runtime should I account for during a typical day ?? [/QUOTE] The HobbyCity 180kv outrunner would be great if outrunners r as good as people say they r (never had personal experience with one). I would suggest one on every drive wheel. I must ask though, how dependable r these motors?, i mean it isn't like our rc's that u can simply pick up and take home to fix, if the chair breaks down u r stuck until someones finds u; not good if its cold outside. I think 15mph is good number to shoot for. My chair will do a 16 mile range @ full tilt(7.5mph), so i would like to at least that of range on a single charge going 15mph.