RC-Monster Forums - View Single Post - Kyosho ST-RR conversion

Gee · 12.16.2008, 09:05 PM

Nice work George. Look nice and clean. Let us know how it runs with the motor and what Lipos you use. I had mine converted but took it back until I pass the 4s threshold. I made a tope plate out of lexan that streched out over the front and the rear of the center differential. Made a nice place to put the esc and receiver up out of harms way like you have the esc setup now. I didn't need the top brace over the differential due to the lexan provided that for me. Don't want to muck up your build thead with pic or links. But if you want ot check it out there some picture of it in my thread Kyosho upgrade and conversion here in the truggy section.

If you still have the other part of the servo tray. Could you do me a favour and measure what the length of the servo tray would have been before it got dropped and broke into two pieces?

Once again nice work. Looks great!

	(#8)
Gee A Horse's Ass Offline Posts: 1,065 Join Date: Oct 2007 Location: Spokane WA	12.16.2008, 09:05 PM Nice work George. Look nice and clean. Let us know how it runs with the motor and what Lipos you use. I had mine converted but took it back until I pass the 4s threshold. I made a tope plate out of lexan that streched out over the front and the rear of the center differential. Made a nice place to put the esc and receiver up out of harms way like you have the esc setup now. I didn't need the top brace over the differential due to the lexan provided that for me. Don't want to muck up your build thead with pic or links. But if you want ot check it out there some picture of it in my thread Kyosho upgrade and conversion here in the truggy section. If you still have the other part of the servo tray. Could you do me a favour and measure what the length of the servo tray would have been before it got dropped and broke into two pieces? Once again nice work. Looks great!