I put some thought into a new setup made from things I had laying around.
It was time to pair the Mamba Monster with some Monster Tires. Mate the Medusa 36-60-1500kv with the E maxx on 10000mah 4S Lipo.
To insure decent motor temps, a HV Maxx heat sink was used. Works really well too, I might add.
For gearing, I used a 52 tooth Mod 1 spur and a 18 tooth Mod 1 pinion, I made from an original style E maxx tranny input shaft.
This thing will almost do a standing flip!
Traction out the wazoo! These tires are almost 7 1/2 inches tall.
About 10 minutes into the run, I notice this clicking sound. The tranny has the 2 speed kit installed. When I switched the tranny to low gear, I knew I had just about stripped out high gear.
These 2 speed kits aren't all their cracked up to be.
It would still go, so I figured what the heck. Keep running it and see what kind of runtime I get with all this battery packed on.
About 25 minutes into the run, I seen some of the most insane flips.
Then It did one more flip, and this is what I walked up on. I thought it was sitting awfully funny!
Ummmm, I think it's time for some upgrades!