RC-Monster Forums - View Single Post

BrianG · 12.29.2008, 03:39 AM

I don't think it matters what you use to charge lipos in as long as the following guidlines are met:

> Container should absorb a flame up, not contain it. There should be breathing holes to vent the pressure.

> Container is non-conductive. If the wires happen to touch a metal object at the same time, it could CAUSE a problem. This may be true if there are holes drilled and the wire insulation chafes.

> Container should be able to dissipate enough heat, or insulate the heat, in a flame up to not catch fire to whatever it is sitting on.

	(#15)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	12.29.2008, 03:39 AM I don't think it matters what you use to charge lipos in as long as the following guidlines are met: > Container should absorb a flame up, not contain it. There should be breathing holes to vent the pressure. > Container is non-conductive. If the wires happen to touch a metal object at the same time, it could CAUSE a problem. This may be true if there are holes drilled and the wire insulation chafes. > Container should be able to dissipate enough heat, or insulate the heat, in a flame up to not catch fire to whatever it is sitting on.