Quote:
Originally Posted by pedeboi364
^^^^thanks for the input, i just read in another thread about the crappyness of the plush. Now my top options are to go with the EZrun stuff (i found a 9t, 60a combo with programming card for $90 on swanghobby.com) or to snag the MM and a pair of motors. Just wondering, but can anyone point me to a thread that well describes how to do the 4s mod for the MM? I think a 10L on 4s in a stampede or WK would be sweet!!
|
A 10l on 3s lipo is plenty for a pede. It is only 2wd, so only so muck power can be put to the ground. If you stick with 3s no mods need to be done to the MM. You can run an external bec and the temps on the mm will be better, but it is not really necessary for 10th scale. 4s is not necessary for 10th either, the vehicles are lighter and do not need the extra voltage. I prefer the simplicity of a stock mm and a 3000-3500kv motor like the traxxas velineon motor, or a feigao 10s - 12s. Either are a great choice for a pede, and will do 40-50mph on 3s lipo with no issues.
The wk will put more load on the batt and lipo being 4wd, but a 10l would throw that truck around on 3s lipo. Not sure if the diffs and tranny would handle that motor... but you can try and let us know!!!!