RC-Monster Forums - View Single Post

E-Revonut · 12.30.2008, 08:20 PM

Since this thread seams to have been revived I'll make my comments. I have taken my badlands apart, cleaned the inside with alcohol and re-taped them with reinforced packing tape. Now I like my badlands again! I did order a pair of bowties for racing though. All will be mounted on beadlocks. My badlands will go to the 0 offsets maximizer beadlocks and I will put the bowties on the 1/2 offset. Should I tape the bowties as well?

	(#9)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	12.30.2008, 08:20 PM Since this thread seams to have been revived I'll make my comments. I have taken my badlands apart, cleaned the inside with alcohol and re-taped them with reinforced packing tape. Now I like my badlands again! I did order a pair of bowties for racing though. All will be mounted on beadlocks. My badlands will go to the 0 offsets maximizer beadlocks and I will put the bowties on the 1/2 offset. Should I tape the bowties as well? RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh