RC-Monster Forums - View Single Post - SH Z-Car ZMXB-8 1/8 Buggy

Shark413 · 05:59 PM

Some updated pictures of my Z-Car conversion. Added the MMM, rx box, battery tray and some Proline Revolver tires. Took it out for a test run and found that the stock springs are way too soft even with max preload, until I can get some stiffer springs I may replace the shocks with some Kyosho Big Bores.

Metaman, what's the situation on the stiff springs? HobbyPeople.net shows the stiff front springs on backorder.

Here is the buggy the Z-Car is competing agains't, my brushless Kyosho 777 sp2.

Side-by-side

	(#84)
Shark413 RC-Monster Carbon Fiber Offline Posts: 468 Join Date: Nov 2006 Location: Los Angeles, CA	01.02.2009, 05:57 PM Some updated pictures of my Z-Car conversion. Added the MMM, rx box, battery tray and some Proline Revolver tires. Took it out for a test run and found that the stock springs are way too soft even with max preload, until I can get some stiffer springs I may replace the shocks with some Kyosho Big Bores. Metaman, what's the situation on the stiff springs? HobbyPeople.net shows the stiff front springs on backorder. Here is the buggy the Z-Car is competing agains't, my brushless Kyosho 777 sp2. Side-by-side Losi 2.0 8ight-E / Losi 2.0 8ight-E/T / jammin SCTRC10 / Slash 4x4 PE Last edited by Shark413; 01.02.2009 at 05:59 PM.