RC-Monster Forums - View Single Post

E-Revonut · 01.03.2009, 12:41 PM

As you can see that will cost a lot of $!!! Your best bet is an RTR to get started. As you break things, and you will, upgrade them! Thats how I did mine. I will make a few suggestions to help. Get aluminum caster blocks ASAP! Bumping a curb at even 10MPH will break the stock ones. Don't bother with aluminum arms, get RPM arms, they flex instead of breaking saving your chassis, esspecially if you upgrade to an aluminum chassis, however I don't see any real need for that.

	(#32)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	01.03.2009, 12:41 PM As you can see that will cost a lot of $!!! Your best bet is an RTR to get started. As you break things, and you will, upgrade them! Thats how I did mine. I will make a few suggestions to help. Get aluminum caster blocks ASAP! Bumping a curb at even 10MPH will break the stock ones. Don't bother with aluminum arms, get RPM arms, they flex instead of breaking saving your chassis, esspecially if you upgrade to an aluminum chassis, however I don't see any real need for that. RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh