RC-Monster Forums - View Single Post

George16 · 01.04.2009, 06:19 AM

Jerry, I had been making hinge pins from through-hardened ejector pins. They will break before they bend which is better for my application.

I get mine from plastixs.com because they are cheaper compared to mcmaster-carr.

By the way, you need the 1/8" diameter which is equivalent to 3.175mm.
http://plastixs.com/ep03.html

Here's my gmaxx build thread which includes some pictures on how I made my pins captured.
http://www.rc-monster.com/forum/show...t=12463&page=4

	(#2)
George16 Supermaxx Offline Posts: 2,031 Join Date: Oct 2007 Location: Earth	01.04.2009, 06:19 AM Jerry, I had been making hinge pins from through-hardened ejector pins. They will break before they bend which is better for my application. I get mine from plastixs.com because they are cheaper compared to mcmaster-carr. By the way, you need the 1/8" diameter which is equivalent to 3.175mm. http://plastixs.com/ep03.html Here's my gmaxx build thread which includes some pictures on how I made my pins captured. http://www.rc-monster.com/forum/show...t=12463&page=4 Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer) Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2)