RC-Monster Forums - View Single Post - My Losi 8T Tekno Conv.-Modified for low CG

himalaya · 01:04 AM

Yes I run the two batteries in parallel to get a 6S 5.2Ah 25C LiPo. This config killed my first MMM V2, my seconde V2 survived after updated to firmware V1.2.

Major problem of my mod is a difficulty to change the batteries. To securely fasten the LiPos I use a combination of Velcro and bolts, when change batteries I have to unscrew the six nylon lock nuts, not as convinient as original velcro-only setup, but is obviously much tougher. The good side is, the 22.2V*5.2Ah=115Wh energy lasts at least half hour, so not that often does the LiPo need to be changed.

	(#10)
himalaya RC-Monster Carbon Fiber Offline Posts: 392 Join Date: Nov 2008	01.09.2009, 01:02 AM Yes I run the two batteries in parallel to get a 6S 5.2Ah 25C LiPo. This config killed my first MMM V2, my seconde V2 survived after updated to firmware V1.2. Major problem of my mod is a difficulty to change the batteries. To securely fasten the LiPos I use a combination of Velcro and bolts, when change batteries I have to unscrew the six nylon lock nuts, not as convinient as original velcro-only setup, but is obviously much tougher. The good side is, the 22.2V5.2Ah=115Wh energy lasts at least half hour, so not that often does the LiPo need to be changed. ....What a Blue Sky....* Last edited by himalaya; 01.09.2009 at 01:04 AM.