RC-Monster Forums - View Single Post

tom255 · 01.12.2009, 04:50 AM

Actualy all parts are custom made and designed by self. I have CNC.
Battery box made from derlin and all aluminium parts from 6061-T6 grade.
Castle motor runs realy nice but bit hot imho its have too much torque for my taste but a little bit play with trottle expos and hight torque now under control.
I run for now a 4S lipo. And motor temp is 56C=~132F with ambient 3C=~35F after 10min of race.
Trugy was geared to ~42mph by top speed estimator. I need to buy smaller pinion to gear´it for lower speed, its too much for our local winter track
Batteries are used Zippy-H (5000mah 4S) and Zippy-R (2x2500mah 4S in parallel)
Full RTR weight is 4410g=~9.7lbs

	(#6)
tom255 RC-Monster Carbon Fiber Offline Posts: 252 Join Date: Aug 2006 Location: Estonia, Tallinn	01.12.2009, 04:50 AM Actualy all parts are custom made and designed by self. I have CNC. Battery box made from derlin and all aluminium parts from 6061-T6 grade. Castle motor runs realy nice but bit hot imho its have too much torque for my taste but a little bit play with trottle expos and hight torque now under control. I run for now a 4S lipo. And motor temp is 56C=~132F with ambient 3C=~35F after 10min of race. Trugy was geared to ~42mph by top speed estimator. I need to buy smaller pinion to gear´it for lower speed, its too much for our local winter track Batteries are used Zippy-H (5000mah 4S) and Zippy-R (2x2500mah 4S in parallel) Full RTR weight is 4410g=~9.7lbs