RC-Monster Forums - View Single Post - Savage 21 BL Conversion - From The Beginning...Advice Appreciated =)

08:43 AM

Got my charger (Hyperion DUOII) and speedy (MGM 16025 Z-series) today =) Cant use the charger yet, as i sold my old power supply to get the new one which is still on its way...

I didn't like the way they wanted me to mount the ESC, so i made my own way - anyways, enjoy some new pictures finally! =)

Here i have used double sided tape and some foam to help keep the speedy in place a tad firmer...

Here's the same view with the ESC installed...

Side shot - you can see how it is mounted here, sorta, with the silver button head screw.. screwed into where the fan usually is screwed...

Angle shot - here you can see how i mounted the switch... i just used one of the micro servo mounts, and bent the tab a smidge...

Angle birds-eye from the side...

Top Birds-eye... SLIGHTLY less width than the motor... no clearance issues here =)

Just batteries to go!! w00t w00t!!

	(#7)
danhfvcsd Guest Posts: n/a	01.12.2009, 08:41 AM Got my charger (Hyperion DUOII) and speedy (MGM 16025 Z-series) today =) Cant use the charger yet, as i sold my old power supply to get the new one which is still on its way... I didn't like the way they wanted me to mount the ESC, so i made my own way - anyways, enjoy some new pictures finally! =) Here i have used double sided tape and some foam to help keep the speedy in place a tad firmer... Here's the same view with the ESC installed... Side shot - you can see how it is mounted here, sorta, with the silver button head screw.. screwed into where the fan usually is screwed... Angle shot - here you can see how i mounted the switch... i just used one of the micro servo mounts, and bent the tab a smidge... Angle birds-eye from the side... Top Birds-eye... SLIGHTLY less width than the motor... no clearance issues here =) Just batteries to go!! w00t w00t!! Last edited by danhfvcsd; 01.12.2009 at 08:43 AM.