Ok guys here it is! After 4 months of hard planning, modding and buying I finally got this bad boy running. It runs great over all but still needs a voltage upperage. Here is my current Setup and my future Setup...
Current....
ESC- AstroFlight 75a 60v
Motor- CIM Large Robotics Motor 440kv
Battery's- 18v 4000mah nimh's.
Powered by- Chain, sprokets and gears...
Future...
ESC- 48v Victor HV ESC
Motor- No changes...
Battery's- 10-12s 4000-6000mah lipos with atleast 25c's.
Also the big joes are lasting very well on the 1/5. I picked up some 1/5 foams and modded them to fit inside the big joes and it really helps the tires from flattening while sitting. Anyways without further adue, here are some pics.
