RC-Monster Forums - View Single Post

George16 · 01.18.2009, 08:25 PM

Don't use CA. It will harden so much that it will make it brittle and more susceptible to cracking. Use a contact adhesive called UHU-POR which is more superior to all other glues. The nice thing about UHU-POR is that it never fully cures and remains slightly flexible meaning that it will let the carbon flex a bit in case of high stresses.

	(#3)
George16 Supermaxx Offline Posts: 2,031 Join Date: Oct 2007 Location: Earth	01.18.2009, 08:25 PM Don't use CA. It will harden so much that it will make it brittle and more susceptible to cracking. Use a contact adhesive called UHU-POR which is more superior to all other glues. The nice thing about UHU-POR is that it never fully cures and remains slightly flexible meaning that it will let the carbon flex a bit in case of high stresses. Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer) Predator with OS .21TM Supermaxx with Mach .26 Revo with OS .18TZ Kyosho ST-RR Conversion Ofna CR with Tekin ESC/Motor (2)