RC-Monster Forums - View Single Post

joeling · **E REVO power system -** 01.26.2009, 09:46 AM

Hi,

OK, yet another thread on the power system for this truck. After looking around a little bit, I've decided to settle for 6S & a Medusa 70mm 1600KV (or thereabouts) motor. I'll use these lipo packs based on the fact that they fit the small battery compartments.

http://www.hobbycity.com/hobbycity/s...idProduct=7298

I'll gear the truck to have similar final ratio as that of a typical nitro truggy.

ESC used will be a MMM V3 (thanks SuperEk4).

Regards,
Joe Ling

	(#1)
joeling RC-Monster Carbon Fiber Offline Posts: 463 Join Date: Aug 2005 Location: Malaysia	E REVO power system - 01.26.2009, 09:46 AM Hi, OK, yet another thread on the power system for this truck. After looking around a little bit, I've decided to settle for 6S & a Medusa 70mm 1600KV (or thereabouts) motor. I'll use these lipo packs based on the fact that they fit the small battery compartments. http://www.hobbycity.com/hobbycity/s...idProduct=7298 I'll gear the truck to have similar final ratio as that of a typical nitro truggy. ESC used will be a MMM V3 (thanks SuperEk4). Regards, Joe Ling Hyper 9e Medusa 4S, Savage 5S MMM 8XL, Jammin' 4S Neu MMM, X2 Ninja JX, X2 MMM 5S Neu, E REVO Medusa 6S