|
01.31.2009, 03:26 AM
Try dipping the motor leads on solvents such as ether, paint thinner, naptha or acetone. I had good luck removing the wire's enamel coating using paint thinner and naptha. I'm also using a Weller 80W iron with a broad tip.
Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer)
Predator with OS .21TM
Supermaxx with Mach .26
Revo with OS .18TZ
Kyosho ST-RR Conversion
Ofna CR with Tekin ESC/Motor (2)
|