I am not sure about the brand name...but a few years ago I bought a can of Plasti-Dip spray "paint" for a special non-rc project. I have also painted some old tool handles with it and it has held up well...but its all in how you prep the surface. Never tried painting RC parts with this stuff but it seems like it would be a good approach to:
1. strip the stock finish (oven cleaner)
2. rinse
3. use some medium grit sand paper to scuff the surface
4. clean with soap and water
5. apply some denatured alcohol to make sure the surface free of oils
6. dry
7. suspend chassis on string and apply several coats of Plasti-Dip spray coating (make sure not to use your bare hands when handling the chassis
