RC-Monster Forums - View Single Post

Arct1k · 02.18.2009, 06:16 AM

pretty much but generally to an ubec rather than directly to the battery.

When i did this mod on my clod I removed the signal wire from the servo plug and instered it into a spare male plug - each servo then has two plugs, one with + and - and one with signal.

The signal plugs go to the rx.

For the + and - leads i created a 3 to 1 y adapter - plugging in the two servos and the ubec - the two servos are then powered directly from the ubec.

For the output of the y i left only the - which plugged into the rx to provide a common ground.

hope that makes sense.

	(#7)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	02.18.2009, 06:16 AM pretty much but generally to an ubec rather than directly to the battery. When i did this mod on my clod I removed the signal wire from the servo plug and instered it into a spare male plug - each servo then has two plugs, one with + and - and one with signal. The signal plugs go to the rx. For the + and - leads i created a 3 to 1 y adapter - plugging in the two servos and the ubec - the two servos are then powered directly from the ubec. For the output of the y i left only the - which plugged into the rx to provide a common ground. hope that makes sense.