RC-Monster Forums - View Single Post

marcus · 02.24.2009, 12:46 PM

The front diff needs a rebuild and I have parts on order. Until then I'll test on 2WD.

The gearing on the EK4 is pretty low and after calculations I worked out that to simulate the 17,500rpm/18T pinion combo of the Nitro version, a 10T pinion/8XL/4S would be similar. I used a 12T pinion as a start point figuring the low end torque of the 8XL will pull through.

	(#4)
marcus RC-Monster Carbon Fiber Offline Posts: 158 Join Date: Jan 2008	02.24.2009, 12:46 PM The front diff needs a rebuild and I have parts on order. Until then I'll test on 2WD. The gearing on the EK4 is pretty low and after calculations I worked out that to simulate the 17,500rpm/18T pinion combo of the Nitro version, a 10T pinion/8XL/4S would be similar. I used a 12T pinion as a start point figuring the low end torque of the 8XL will pull through. The Brushless Fleet