RC-Monster Forums - View Single Post

SunnyHouTX · 07:09 PM

Also please check the resistance between a male/female connection of the 6.5mm bullets. I saw a situation where the resistance was about 1000ohms (or was it miliohms) compared to the 50 that a Deans connection gave. With those restrictive connectors the car ran like a slug and puffed a lipo pack.

Taking off the plating with very fine grit sand paper and cleaning up the bullets helped in the above situation.

	(#6)
SunnyHouTX 2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ Offline Posts: 396 Join Date: Apr 2008	02.24.2009, 07:06 PM Also please check the resistance between a male/female connection of the 6.5mm bullets. I saw a situation where the resistance was about 1000ohms (or was it miliohms) compared to the 50 that a Deans connection gave. With those restrictive connectors the car ran like a slug and puffed a lipo pack. Taking off the plating with very fine grit sand paper and cleaning up the bullets helped in the above situation. Quickest 1/10 Top Fuel Dragster Last edited by SunnyHouTX; 02.24.2009 at 07:09 PM.