RC-Monster Forums - View Single Post - Are Zippy Lipos safe with a Castle MMM Speedy?

fastbaja5b · 02.24.2009, 08:09 PM

...ok so is that a yes or no to Mr Zippy?

and while I am here, can I run this flux with the 20t pinion, this thread here:
http://www.ausrc.com/forum/showthread.php?t=15868

They are blaming a smoked esc on not running a 25t pinion on 6s, wheras on this forum I was under the understanding that more volts = gear down to get less amps and therefore less heat.

So what is it?

Are Polyquest 5000mah 25c 3s packs sufficient?

	(#57)
fastbaja5b RC-Monster Aluminum Offline Posts: 704 Join Date: May 2008	02.24.2009, 08:09 PM ...ok so is that a yes or no to Mr Zippy? and while I am here, can I run this flux with the 20t pinion, this thread here: http://www.ausrc.com/forum/showthread.php?t=15868 They are blaming a smoked esc on not running a 25t pinion on 6s, wheras on this forum I was under the understanding that more volts = gear down to get less amps and therefore less heat. So what is it? Are Polyquest 5000mah 25c 3s packs sufficient? Say Less, Do More.