RC-Monster Forums - View Single Post

BrianG · 11:07 AM

Specs look ok, if a bit low. If specs aren't inflated, it might be ok running 4s on a low kv motor in a light 2WD 1/10 scale (max) vehicle; anything larger, or lower voltage, will probably exceed the low 40A spec. And it looks like it doesn't have a switching BEC, so if running anything over 2s, you'll need an external one or a receiver pack.

It's really hard to say though. There is more to an ESC other than specs: customer service/warrant, upgradability, smoothness, etc

	(#3)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	03.05.2009, 11:06 AM Specs look ok, if a bit low. If specs aren't inflated, it might be ok running 4s on a low kv motor in a light 2WD 1/10 scale (max) vehicle; anything larger, or lower voltage, will probably exceed the low 40A spec. And it looks like it doesn't have a switching BEC, so if running anything over 2s, you'll need an external one or a receiver pack. It's really hard to say though. There is more to an ESC other than specs: customer service/warrant, upgradability, smoothness, etc Last edited by BrianG; 03.05.2009 at 11:07 AM.