RC-Monster Forums - View Single Post

Arct1k · 08:53 AM

For a brushless motor it does not matter about the order / colour of the wires - If the motor spins in the wrong direction just swap any two wires.

Generally for a brushled motor (change the settings via castle link) and only use the red and black leads - White should be taped up.

For Ultra hi-power brushed mode all leads are connected to black (-) on motor and the red (+) is connected directly to the battery.

Refer to the following for pics:

http://www.castlecreations.com/suppo...s_ed_guide.pdf

	(#16)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	03.10.2009, 08:50 AM For a brushless motor it does not matter about the order / colour of the wires - If the motor spins in the wrong direction just swap any two wires. Generally for a brushled motor (change the settings via castle link) and only use the red and black leads - White should be taped up. For Ultra hi-power brushed mode all leads are connected to black (-) on motor and the red (+) is connected directly to the battery. Refer to the following for pics: http://www.castlecreations.com/suppo...s_ed_guide.pdf Last edited by Arct1k; 03.10.2009 at 08:53 AM.