|
03.11.2009, 02:41 PM
If you have already gone over 200 degrees I would be careful. From reading your original post, it looks like your motor might have had problems from the start. Possible short in the wires, motor screws too longs, or something during the manufacturing process. Now that you have gone over 200 you should call Medusa (if you haven't already) and explain to them what has happened. They are ok with customer service.
Losi 8B 1.0, Tekno V3, Direct-Drive, 13/48, RX8, T8 1400kv
Losi 8B 1.5, Tekno V3 w/clutch (3-shoe), 14/48, MMM, Neu 1512 2Y
Losi 8T 2.0, Tekno V3 w/clutch (3-shoe), 14/48, MMM, T8 1550kv
|