RC-Monster Forums - View Single Post

JerryC · 03.11.2009, 05:35 PM

I know this is going to sound kind of crazy, but I took the RC8 to the track again today and after about 15 min. of running (just like yesterday) the temp only got to 145* the only thing I changed was the timing to normal (10*) in the MMM. I did not get to run it as long as I wanted because I blew out one of the front bearings. So I will try it again tomorrow and see if the same thing happens again (not the bearing). The motor seems to still be running very good even though it made it past 200* yesterday. I know the temp was right because I temped it with 2 different guns, but I did slowly drive the car around yesterday after it hit 200 to help it cool down.
Jerry

	(#11)
JerryC RC-Monster Stock Offline Posts: 12 Join Date: Feb 2009	03.11.2009, 05:35 PM I know this is going to sound kind of crazy, but I took the RC8 to the track again today and after about 15 min. of running (just like yesterday) the temp only got to 145* the only thing I changed was the timing to normal (10) in the MMM. I did not get to run it as long as I wanted because I blew out one of the front bearings. So I will try it again tomorrow and see if the same thing happens again (not the bearing). The motor seems to still be running very good even though it made it past 200 yesterday. I know the temp was right because I temped it with 2 different guns, but I did slowly drive the car around yesterday after it hit 200 to help it cool down. Jerry