RC-Monster Forums - View Single Post - can't get my 9920 and 9xl setup to work with ubec

RC-Monster Mike · 12.09.2005, 10:29 AM

Make sure you are plugging the controller lead into the receiver in the proper orientation. If you have steering, but no throttle, it sounds like the copntroller lead could be in backwards. Also, make sure your throttle channel is not reversed and re-program it. LMK if this works. I am sure we can figure it out, though.

	(#4)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	12.09.2005, 10:29 AM Make sure you are plugging the controller lead into the receiver in the proper orientation. If you have steering, but no throttle, it sounds like the copntroller lead could be in backwards. Also, make sure your throttle channel is not reversed and re-program it. LMK if this works. I am sure we can figure it out, though.