|
03.14.2009, 07:55 AM
rx stands for the receiver.....just disconnect the red wire on the plug from the esc the plugs into the receiver. Don't cut the wire...either tape it out of the way or heat shrink it
1. MBX-6 T8 1900KV, RX8 ON 4S
2. MBX-5T 1520, MMM ON 5S
3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S
4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S
5. TEN T 2650 T8, MMP ON 3S
|