RC-Monster Forums - View Single Post

RUSTY XL-5 · 08:48 AM

I'm running a mm but I am using an external BEC.

timing is 10...I heard that this was best for 4 pole motors
drag brake is 8
cut off V is 9.3
brake is 45%
punch control is disabled (I like it this way)
start power is medium

I was running drag brake at 15 and start power on high, but I changed that and it helped a bit with temps.

	(#4)
RUSTY XL-5 RC-Monster Carbon Fiber Offline Posts: 323 Join Date: Feb 2008 Location: Durham, N.C.	03.20.2009, 08:41 AM I'm running a mm but I am using an external BEC. timing is 10...I heard that this was best for 4 pole motors drag brake is 8 cut off V is 9.3 brake is 45% punch control is disabled (I like it this way) start power is medium I was running drag brake at 15 and start power on high, but I changed that and it helped a bit with temps. I will spank a nitro any day...guaranteed. :) Last edited by RUSTY XL-5; 03.20.2009 at 08:48 AM.