RC-Monster Forums - View Single Post - Losi 1/8 ESC works great with latest firmware

spcpicard · 03.23.2009, 09:50 AM

Ron Schuur, AKA rocketron told me on March 5th that he had the inventory on hold for the escs and that he was controlling the release. I emailed him back for the reason and he never replied. Ron is over the Xcelorin line for Losi. I used my xcelorin 1/8 system since it was originally released with my LE E 8ight back in Sept and never had a problem until late Feb. I suspected the problem to be a loose bullet connector in the esc. Version 20 of the firmware is supose to be really smooth, to bad I can't use it since I can't get my esc back. FYI the motors have also been improved since the original ones. They went to a carbon fiber wrap on the rotor instead of the kevlar, an they also keyed the ends of the rotors along with going with brass spacers similar to the neus.

	(#14)
spcpicard RC-Monster Stock Offline Posts: 46 Join Date: Dec 2008	03.23.2009, 09:50 AM Ron Schuur, AKA rocketron told me on March 5th that he had the inventory on hold for the escs and that he was controlling the release. I emailed him back for the reason and he never replied. Ron is over the Xcelorin line for Losi. I used my xcelorin 1/8 system since it was originally released with my LE E 8ight back in Sept and never had a problem until late Feb. I suspected the problem to be a loose bullet connector in the esc. Version 20 of the firmware is supose to be really smooth, to bad I can't use it since I can't get my esc back. FYI the motors have also been improved since the original ones. They went to a carbon fiber wrap on the rotor instead of the kevlar, an they also keyed the ends of the rotors along with going with brass spacers similar to the neus.