RC-Monster Forums - View Single Post

tom255 · 01:57 PM

Truggy:Xray XT8, RTR weight 4400g~9,7lbs
Motor: Neu 1515/1.5D/Q Tekno
ESC before fail: Mamba Monster V3
New ESC: Ezrun 150A
Batteries: Zippy-H 4S1P 5000mah
Tires: Proline BowTie LPR
Spur 46
Pinion 13
Geared to ~43Mph

Dont understand me wrong it not cogs extremely but in some circumstances delay is pretty high and start is rough. To compare, MMM is silky smooth.
Gearing not issue, it ran fine before on MMM. MMM failed because ran in heavy snow and ESC was wet, after snow bash went to home and tried after a while turn ESC on and sudenly made puff and magic smoke came out.

BTW tried 26.5 timing on Ezrun 150 and ESC now refuse to start, its dont do nothink cant reset to default settings too :(
Power is on, Fan is on, RX and Servos have power, but ESC not start, unable to program with programming card or set button.
Damn that frustraiting

	(#83)
tom255 RC-Monster Carbon Fiber Offline Posts: 252 Join Date: Aug 2006 Location: Estonia, Tallinn	03.31.2009, 01:22 PM Truggy:Xray XT8, RTR weight 4400g~9,7lbs Motor: Neu 1515/1.5D/Q Tekno ESC before fail: Mamba Monster V3 New ESC: Ezrun 150A Batteries: Zippy-H 4S1P 5000mah Tires: Proline BowTie LPR Spur 46 Pinion 13 Geared to ~43Mph Dont understand me wrong it not cogs extremely but in some circumstances delay is pretty high and start is rough. To compare, MMM is silky smooth. Gearing not issue, it ran fine before on MMM. MMM failed because ran in heavy snow and ESC was wet, after snow bash went to home and tried after a while turn ESC on and sudenly made puff and magic smoke came out. BTW tried 26.5 timing on Ezrun 150 and ESC now refuse to start, its dont do nothink cant reset to default settings too :( Power is on, Fan is on, RX and Servos have power, but ESC not start, unable to program with programming card or set button. Damn that frustraiting Last edited by tom255; 03.31.2009 at 01:57 PM.